User Manual

Nortek Security & Control LLC

REAR PANEL FEATURES

➊

➋

➌

1. Binding Posts

The subwoofer has one pair of binding posts for connection with speaker wire to the

output posts of the Sunre HRSIW8AMP or Procient M3 amplier.

Always use high quality connections and speaker wires, and make sure there are no

loose ttings or stray wire strands. The spring connections accept bare wire or pins.

Connect the positive speaker-level output of the amplier to the positive (red) input

of the subwoofer. Connect the negative speaker-level output of the amplier to the

negative (black) input of the subwoofer.

Make sure that the positive and negative connections do not touch, or this may damage

your power amplier.

2. Speaker Wire Channel

To ease installation, the speaker wiring are passed through these channels to the

binding posts. This is recommended as the channel will support the weight of the

speaker cable, so it does not pull on the binding posts.

3. Clamps

Once the subwoofer is pressed into an opening in the sheetrock, screws on the front

panel are turned to pull the clamps out and down to press against the sheetrock, and

secure the subwoofer in place.