User manual

Note: the projector needs to be charged indoors, since the chargers itself are not waterproof. Keep

the chargers away from humidity. The projector can become warm during the charging process. It’s

recommended to charge the projector at room temperatures, this to extend battery life.

2. When the charge process is completed (4-6 hours) a green LED indicator will be enlightened.

Remove the power supply from the projector and it’s power source when the charging process is

completed.

3. The projector is ready to use now. It can be switched on/off at the backside of the projector. Avoid

direct eye contact with the light source, you risk permanent damage to your eyes. When the battery

is low a red LED indicator will flash and the projector will switch off automaticly, the projector needs

to be charged.

4. After usage of the projector, it needs to be stored indoors. Avoid storage with extreme high or low

temperatures, this will have effect on the battery life of the product.

Note: When the projector is being stored for a long duration (> 6 months) it needs to be recharged

meanwhile. This is to prevent deep discharge of the battery.

Notes on Disposal

Old units, marked with the symbol as illustrated, may not be disposed of in the household rubbish.

You must take them to a collection point for old units (enquire at your local authority) or the dealer

from whom you bought them. These agencies will ensure environmentally friendly disposal.

Care and warranty

Before cleaning the unit, disconnect if necessary from other components; do not use aggressive

cleaning agents. The unit has been carefully checked for defects. If nevertheless you do have cause

for complaint, please go back to the retailer where you have bought the product together with your

proof of purchase. We offer a 2 year warranty from date of purchase. We are not liable for damage

arising from incorrect handling, improper use or wear and tear. We reserve the right to make

technical modifications.

Übersetzung vorbehalten. Reproduktion jeder Art, auch auszugsweise, sowie die Erfassung in EDV Anlagen nur mit schriftlicher

Genehmigung der axhess GmbH & Co.KG. Technischer Stand bei Drucklegung, Änderung in Design und Ausstattung

vorbehalten.