User manual

Packaging contents

1x Led projector

1x AC/DC home charger

1x DC/DC car/truck charger

Specifications

Power: 10 W

Input voltage: 12/24 V DC

Lumen output: 750

Color temp. 6500K +/- 400K

Charging time: 5,0 hours

Battery life: 4,0 hours

Battery: 7,4V/4,4 Ah Li-Ion

Protection class: IP65

1 General safety instructions

Please read the operating instructions for the LED projector before use! The operating instructions are

part of the product. They contain important notes on start-up and handlingof the device. Always keep the

enclosed operating instructions so as to be able to look up information! They must be enclosed when

passing the device on third parties.

2 Safety precautions

The user must observe the safety notes and warnings in order to maintain this status and to ensure safe

operation. Please read the operating instructions before startup!

The LED projector may be used outdoors, but avoid contact with extreme temperatures or vibrations,

this may cause damage to (the battery of) the projector.

Do not immerse the enclosure into water, since the protection class of this product is IP65 (wheater

proof).

Never attempt to open the device.

The LED projector cannot be repaired; this part must be immediately disposed in case of a defect.

Ensure sufficient ventilation of the device. Never cover it during operation. Avoid a strong operational

demand. Do not install in reach of children or animals. Do not use other than supplied power supplies to

charge the projector. The LED projector may only be recharged indoors at temperatures above 0°C.

Any other use of the device than described above can damage the product or endanger the user due to

e.g. short-circuits, fire or an electric shock. The entire product may not be modified, adapted, or opened.

These safety notes must be observed in all cases! Any warranty claim is void in the case of damages

caused by non-observance of these operating instructions. We are not liable for consequential damages

or for damages to property or persons caused by non-observance of the safety notes and improper

operation of the device.

Safe operation is not possible anymore, if:

- the LED projector has visible damages,

- the LED projector does not work anymore

3 Operating instructions

1. Before using the projector fpr the first time it needs to be fully charged by one of the included

chargers. Please connect the AC adapter or DC car adapter to the charge socket at the back of the

projector. Then connect the charger to it’s power source.

PAGE 1
Packaging contents 1x Led projector 1x AC/DC home charger 1x DC/DC car/truck charger Specifications Power: 10 W Input voltage: 12/24 V DC Lumen output: 750 Color temp. 6500K +/- 400K Charging time: 5,0 hours Battery life: 4,0 hours Battery: 7,4V/4,4 Ah Li-Ion Protection class: IP65 1 General safety instructions Please read the operating instructions for the LED projector before use! The operating instructions are part of the product. They contain important notes on start-up and handlingof the device.
PAGE 2
Note: the projector needs to be charged indoors, since the chargers itself are not waterproof. Keep the chargers away from humidity. The projector can become warm during the charging process. It’s recommended to charge the projector at room temperatures, this to extend battery life. 2. When the charge process is completed (4-6 hours) a green LED indicator will be enlightened. Remove the power supply from the projector and it’s power source when the charging process is completed. 3.