Specification Sheet

Conveying Components
UltraTrac steel profiles
UltraTrac profiles are sold only in complete
assemblies with TIVAR chain guide or belt guide
inserts.
Standard profile lengths are 120".
Right for your environment. UltraTrac profiles are
available in both stainless steel (for food handling) and
galvanized steel.
Easy, economical mounting. Simply screw or weld
UltraTrac profiles into place.
Mounting tip: Remember the effects of heat when you plan for assemblies of steel and plastic materials. The assembly
suggested above accommodates the relatively large linear expansion coefficient of plastic materials. As a rule, the
expansion for
TIVAR = .0001 inches/inch/°F. In cases of large temperature fluctuations, we recommend using short
slide rails to minimize the width of slots. Slide rails should be fastened to the C-channel to prevent displacement in the
direction of travel as illustrated above.
B
H
S
b
Channel #
C10, C11
B
H
S
b
Channel #
C3, C5, C9
10 FT
Expansion Slot
Fastening
Direction of Travel
TIVAR
Metal
Profile
Galvanized Steel C-Profile 10 ft. lengths
304 Stainless Steel C-Profile 10 ft. lengths
P
rofile No. B b H S
C
3 0.780 0.390 0.390 0.060
C5 1.100 0.550 0.470 0.075
C9 1.500 0.870 0.710 0.100
C10 1.180 0.790 0.940 0.060
C11 1.772 1.220 1.575 0.079
Profile No. B b H S
C3 0.780 0.390 0.390 0.060
C5 1.100 0.550 0.470 0.075
C9 1.500 0.870 0.710 0.100
C10 1.180 0.790 0.940 0.060
C11 1.772 1.220 1.575 0.079