User`s manual

Section 10: Technical Specifications 81
Technical
Specifications
Printing Method: Dye-sublimation/resin thermal transfer
Printing Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million
Print Speed: Approximately 8 seconds (K)
Approximately 15 seconds (KO)
Approximately 30 seconds (YMCKO)
Additional 20 seconds required if applying PolyGuard
overlaminate with Pro-L
Printing Area: Standard CR-80 Card:
Car
d Size
2.125Ó (54mm) x 3.375Ó (85.6mm)
Print
Area
2.11Ó (53.5mm) x 3.37Ó (85.5mm)
Oversize Card (Pro-L only):
Car
d Size
2.36Ó (60mm) x 3.62Ó (92mm)
Print
Area
2.24Ó (56.9mm) x 3.37Ó (85.5mm)
Accepted Card Width: Pro: 2.1Ó to 2.3Ó W (53mm to 54mmW)
Pro-L: 2.1Ó to 2.63Ó W (53mm to 67mmW)
Accepted Card Length: Single Sided: 3.25Ó to 3.88Ó L (82mm to 98mmL)
Double Sided: 3.25Ó to 3.37Ó L (82mm to 85.3mmL)
Accepted Card Thickness: Pro: .010Ó to .030Ó (.254mm to .75mm);
Pro-L: .010Ó to .040Ó (.254mm to 1.02mm);
10
510301_pro_proL 11/24/98 12:03 PM Page 81