User`s manual

Pro/Pro-L Card Printer UserÕs Manual
Section 9: Troubleshooting 69
TOP Line of LCD (continued)
Message Cause Solution
No Shield Loaded You are trying to print If using the SmartGuard
with the printer driverÕs feature, insert an access card
SmartShield option selected which contains a SmartShield
even though you (a) are image or encode a
not using the optional SmartShield image onto the
SmartGuard Security current card and try your
Feature or (b) if using the print job again. If you do not
SmartGuard feature, you wish to print a SmartShield
do not have a SmartShield image, simply deselect the
image encoded onto the printer driverÕs SmartShield
SmartGuard Access Card option.
currently inserted into the
printer.
Print Cover Open The top-right cover is not Check that nothing is blocking
properly shut. the cover from being shut and
close the cover.
Printer Ready Indicates printer is ready
to print.
Printing Indicates printer is printing.
Printing Yellow Indicates print ribbonÕs
yellow panel is printing.
Printing Magenta Indicates print ribbonÕs
magenta panel is printing.
Printing Cyan Indicates print ribbonÕs
cyan panel is printing.
Printing Black Indicates the print ribbonÕs
black panel is printing.
Printing Black-2 Indicates the print ribbonÕs
second black panel is
printing on the back side
of card.
Printing Overlay Indicates print ribbonÕs
overlay panel is printing.
Printing Resin Indicates a resin-only
ribbon is printing.
510301_pro_proL 11/24/98 12:03 PM Page 69