User`s manual

Rotate 180 Degrees
This option allows you to rotate your image 180 degrees when printed. Select this
option if you wish to change the position of your image in relation to the set
location of a cardÕs magnetic stripe.
Self Test
See Calibrate.
Sensors
See Calibrate.
Split Ribbon Print
Select this option to automatically print full-color on the front of a card and resin
black on the back of a card using any of the Full-Color YMCKO, YMCKK, or
YMCKOK ribbons. Selecting this option provides the most economical means of
printing a dual-sided card since a single set of ribbon panels is essentially ÒsplitÓ to
print both the front and back sides of a card. If using a YMCKO ribbon type, the
front of the card is printed with the ribbonÕs YMC panels and the back is printed
with the K panel. If using a YMCKK or YMCKOK ribbon type, the front of the card
is printed with the YMCK panels and the back is printed with the second K panel.
Note that this option is automatically enabled when the YMCKK or YMCKOK
ribbon type is selected. Also, note that the Print Both Sides option is automatically
enabled when this option is selected.
Use 32-bit Spooler
Select this option for consistently faster print processing. This option is only
selectable if operating under Windows 95 or Windows 98 and if the included 32-Bit
Print Spooler software has been installed. When selected, this option allows the
printer driver to send all print jobs to the printerÕs 32-Bit Print Spooler rather than
to the system spooler of Windows. See Part C of this section for complete details on
the 32-Bit Print Spooler. This option and the 32-Bit Print Spooler software will not
function in Windows 3.1x.
Write Direct to Port
Selecting this option provides the fastest print processing when printing exclusively
from Windows 3.1x. When selected, this option allows the printer driver to bypass
the Windows 3.1x Print Manager and to send all print data directly to the printer.
This option devotes all of your system resources to the current print job, thereby
increasing overall print speed. When the print job is finished, your system
resources will again be released and devoted to the normal function of your on-
screen applications.
Section 6: Using Your Pro Series Card Printer 47
Pro/Pro-L Card Printer UserÕs Manual
510301_pro_proL 11/24/98 12:03 PM Page 47