User`s manual

34 Section 6: Using Your Pro Series Card Printer
Pro/Pro-L Card Printer UserÕs Manual
Printers folder, and press the Delete key. A message may appear saying, ÒSome files were
used only for this printer and are no longer needed. Would you like to delete these files
now?Ó If you have FargoColor and/or the 32-Bit Print Spooler installed, select NO. If none
of these applications apply, select YES.
Windows 3.1x
To install the Windows 3.1x printer driver, refer to the following:
1. After starting Windows, go to the Main program group and select Control
Panel.
2. From the Control Panel, select Printers.
3. Select Use Print Manager from the bottom left of the Printers window.
4. Select the Add>> button.
5. Highlight the Install Unlisted or Updated Printer option from List of Printers.
6. Select the Install button.
7. Insert the supplied Printer Driver diskette into your computerÕs disk drive. If
you insert the diskette in a drive other than the A: drive displayed in the Install
Driver dialog box, you must change the drive designation. Select the OK
button.
8. ÒPro Card PrinterÓ or ÒPro-L Card PrinterÓ should now be listed in the Add
Unlisted or Updated Printer dialog box. Select the OK button. Your PCÕs disk
drive will now load the printer driver. Depending upon your computer,
loading will take about 10 to 20 seconds.
9. Select the Set As Default Printer button in the Printers window. The card
printer has now been selected as your default (main) printer. If you wish to use
another printer later, you must de-select the card printer and switch back to the
other printerÕs driver.
10. Finally, select the Connect button. Check that the box called Fast Printing
Direct to Port is selected. Although this option is not necessary, it helps
optimize printer driver speed and performance. Select OK to exit the Connect
window. Select Close to exit the Printers window.
C. INSTALLING THE 32-BIT PRINT SPOOLER FOR WINDOWS 95/98
The printer ships with a print utility program called the 32-Bit Print Spooler. This
print spooler is for use only with Windows 95/98. Once installed, the 32-Bit Print
Spooler is able to process your print jobs and send them to the printer at
consistently faster speeds than if sending print jobs through the system spooler of
Windows 95/98. The 32-Bit Print Spooler is ideal for printing a large number of
consecutive ID cards or for printing larger file formats (1 MB or more). The 32-Bit
Print Spooler also allows your computer to display helpful prompts if a printer
error occurs during printing.
510301_pro_proL 11/24/98 12:03 PM Page 34