User`s manual

Pro/Pro-L Card Printer UserÕs Manual
NOTE: The extra port shown in the previous illustration is an Auxiliary Port (subminiature-D
connector) included and used only on units equipped with an optional smart card contact
station. If your unit is equipped with a contact station and you have questions regarding its
use, please contact your authorized reseller.
2. Connect the other side to the back of your PC at the PARALLEL connector.
The printer must have its Ready LED light illuminated to receive data. If the light is
not ON, press the Pause/Resume button.
B. INSTALLING THE WINDOWS PRINTER DRIVER
Your Pro Series Card Printer can be used with virtually any Microsoft Windows
3.1x, Windows 95/98, or Windows NT software application program. Before
printing, you must tell the application that youÕre using a Pro Series Card Printer.
This is accomplished the first time you use the printer by installing in Windows
what is called a Òprinter driver.Ó The printer driver is simply a diskette with
software on it that gives the printer the proper commands it needs in order to print.
Three separate printer driver diskettes are included and labeled for use with
Windows 3.1x, Windows 95/98, and Windows NT. Install the appropriate printer
driver for your system. After youÕve installed the driver, put the driver diskette
away in a safe place for possible future use. For details on all printer driver options,
refer to Part D of this section.
32 Section 6: Using Your Pro Series Card Printer
510301_pro_proL 11/24/98 12:03 PM Page 32