User`s manual

Section 3: Getting Started 17
Pro/Pro-L Card Printer UserÕs Manual
LCD Display for Pro
The LCD display shows you the current status of the printer.
When the printer is first powered ON, the printerÕs startup screen will appear
displaying the current firmware version and the amount of installed printer
memory (4MB or 16MB). Once the printer has finished its startup system check, it
will then display Printer Ready to indicate that the printer is ready for operation.
During operation, the LCD will indicate the specific ribbon panel being printed and
if any printing errors have occurred. For a complete list of possible LCD prompts,
see Section 9-A.
LCD Display for Pro-L
The LCD display shows you the current status of the printer. Since the printerÕs
printing and laminating functions work independently, the top line of the LCD
reports the status of the printing functions, while the bottom line reports the status of
the laminating functions.
When the printer is first powered ON, the printerÕs startup screen will appear
displaying the current firmware version and the amount of installed printer
memory (4MB or 16MB). Once the printer has finished its startup system check, it
will then display Printer Ready and Lam Ready to indicate that the printer is ready
for operation. Lam Adjust Temp will display if the printerÕs built-in laminator is
heating or cooling to its target temperature. During operation, the LCD will also
indicate the specific ribbon panel being printed, whether or not it is laminating, and
if any printing errors have occurred. For a complete list of possible LCD prompts,
see Section 9-A.
On LED Light
Indicates the printer power is either ON or OFF.
Ready LED Light
When ON, this light indicates the printer is ready for operation. When OFF, this
light indicates the printer is either OFF or paused and will not operate. If this light
is flashing, a printer error has occurred. Refer to the printerÕs LCD display for the
specific type of error that occurred. See also Section 9-A for a complete description
of all possible LCD error prompts.
On/Cancel Button
The On/Cancel button turns the printer power ON and OFF. It also serves to cancel
the current print job and reset the printer for the next print job if an unrecoverable
print error has occurred. If a card is left within the printer after a print job is
canceled, it will automatically be ejected when the printer is turned back ON. With
the Top Cover(s) open, this button can also be used to manually wind the feed
rollers forward. This is helpful when cleaning the printer or if clearing jammed
media.
510301_pro_proL 11/24/98 12:03 PM Page 17