User`s manual

14 Section 3: Getting Started
Pro/Pro-L Card Printer UserÕs Manual
■ Printer
■ Power Supply (see Section 3-D)
■ Cleaning Roller Assembly (pre-installed)
■ Printer Driver Software (see Section 6)
■ 32-bit Print Spooler Software; for use in Windows 95/98 only (see Section 6-C)
■ Warranty Statement and Registration Card
■ This manual and other printed information
Save the carton and packing materials. They will come in handy when
transporting the unit.
D. APPLYING POWER
The power supply included with the printer is a universal power supply properly
configured for the power used in your country. To connect this power supply to the
printer, locate the appropriate power cord for your country and refer to the
following steps:
CAUTION! THE INCLUDED POWER SUPPLY IS DESIGNED FOR USE ONLY WITH THE
COLOR ID CARD PRINTER. IF YOU HAVE ANY DOUBTS ABOUT THE
PLUG CONFIGURATION OR THE VOLTAGE, DO NOT ATTEMPT TO USE
THE PRINTER. CONTACT YOUR AUTHORIZED RESELLER FOR
INFORMATION ON THE CORRECT POWER SUPPLY CONFIGURATION.
1. Place the power cord into the power cord port of the power supply.
510301_pro_proL 11/24/98 12:03 PM Page 14