Specifications

10
LAMINATOR UNPACKING
Your laminator is shipped in one box. Some minor assembly is required. You
should clear sufficient space to unpack the laminator. Make sure this area will
provide access to both sides of the laminator as well as the front and back of the
machine.
The laminator is packed in specially designed material for shipping your
laminator safely The Packing material should be retained for transportation
or for shipping in the event of a warranty or service issue.
In the box with the laminator you should find the feed tray and enclosed
hardware. The supply mandrels will be shipped with the stand if the machine was
purchased without a stand the mandrels should be included with your laminator.
1. Remove the feed tray
2. Remove the center piece of foam
3. Using at least two people pull the laminator and remaining packing, by
the lift points, from the box. Use great care, the laminator may be quite
heavy, dropping it will damage it.