Datasheet

Notes
1. The suitability of the motor for use when exposed to water, oil, and chemicals,
x-rays ,ultraviolet rays and the like have not been determined.
2. Plastic fan have been proved that don’t suit to use UV environment, but steel
fan could.
3. The acceptability of the motor leads and terminal assembly should be
determined for each application with regard to wire size, temperature
limitation and other particular aspects which might be required in the end
product.
4. No guarantee on the products against the safety problem or failure caused by
power dust, drop of water or insect.
5. Always ensure that fans are stored according to the storage temperature
specified. Do not store in an environment with a high humidity level. If the
fans were stored for longer than 6 months.
6. Fan must be securely and adequately grounded. This can be accomplished by
connecting a separate ground wire to the fan frame with a self-threading
screw (not furnished) in the hole provided.
7. Protect the power cable from coming in contact with sharp objects.
8. Lock and tag power disconnect to prevent unexpected application of power.
9. Refer to Profan Catalog or label for a complete list of cordset. Plug cordset
into fan and connect to 115 volt or 230 volt power source.
10. Make certain that the power source conforms to the requirements of your
equipment.
11. Profan axial fan are designed to mount in vertical and horizontal direction
only. Arrows stamped on housing indicate direction of blade rotation and
airflow.
12. Capacitor starting fan don’t suit to use on welding machine.
13. Product has one year limited warranty
Page 4