Manualshelf

User Manual

ManualsBrandsProface ManualsComputer HardwareGP4600R - 12.1 Standard HMIs with Rear Mounting Options"
21222324252627282930
22
English
Installation
4 Insert the installation fasteners into the GP unit’s insertion slots on
the top and bottom sides. (left and right sides for the GP-4200
Series.) If the fasteners are not correctly attached, the GP unit may
shift or fall out.
5 Slide the fasteners to the back.
6 Use a Phillips screwdriver to tighten each fastener screw and
secure the GP unit in place. The necessary torque is 0.5 Nm (4.4
lb-in).
Installation Panel
Hook
Slots
(GP-4301T)
Slots
(GP-4201T)