Owner's manual

7
 Attaching the Conversion Adapter
to a Panel
When attaching the Conversion Adapter to a
panel other than the Display’s main unit,
attach it at the two points identified in the
diagram below. Drill holes suitable for
screws as shown in the diagram. For
attachment information, refer to “Attaching
the Conversion Adapter directly to the
Display”.
Unit mm:[in.]
CE Marking
• This product is a CE marked, EMC
compliant product. This product also
conforms to EN61000-6-4, EN61000-6-2
directives.
Digital Electronics Corporation
8-2-52 Nanko-higashi
Suminoe-ku, Osaka 559-0031
JAPAN
TEL: [phone]
FAX: [phone]
http://www.pro-face.com/
© Copyright 2011 Digital Electronics
Corporation. All rights reserved.
75[2.95]
2-M3[0.12] or less
φ 9± 0.1[0.35±0.00]
0.7± 0.1[0.03±0.00]
(2.7[0.11])
φ 6.5± 0.1
3.3±
0.05[0.13±0.00]
4
+0
-
0.2
M3 SCREW
[0.16 ]
+0.00
-
0.01
[0.26±0.00]
Inquiry
If you experience difficulties or have
questions about this product, please
contact us any time.
You can access our support site
“Otasuke Pro!” whenever you need
help with a solution.
http://www.pro-face.com/otasuke/
Please be aware that Digital Electronics
Corporation shall not be held liable by the
user for any damages, losses, or third-
party claims arising from the use of this
product.
Note