Manual

3
Wiring
 Direct Connection Specifications
 Pin Terminal Specifications when using Crimp Terminals
Please use the following items when creating a cable. All items listed below are made
by Phoenix Contact.
Wire Type Simple wire or Lay wire
Cable
dimensions
(cross sec-
tion)
Simple wire: 0.14mm
2
to 1.5mm
2
Lay wire: 0.14mm
2
to 1.0mm
2
Cable size: 26AWG to 16AWG
Strip Length
Recommended
Driver
SZF 0-0,4X2,5 (1204504)
Recommended Pin
Terminals
A 0,34-7 (3009202)
A 0,5-6 (3200218)
Recommended
Crimping Tool
CRIMPFOX ZA 3 (1201882)
• When attaching terminal screws, be sure to use a standard (flat-
blade: 0.4 x 2.5) type screwdriver.
• The appropriate torque is 0.22Nym to 0.25Nym.
• Do not solder the cable's joined section.
• When attaching a cable that uses a lay wire, be sure to twist the
cable core's wires. Failure to do so can lead to a short circuit if
wire strands contact another strand or a nearby electrode.
• To prevent Terminal Block Conversion Adapter cables from being
pulled out, be sure to bundle the cables externally.
5mm
[0.2in.]