User guide

178

B Serial Interface (COM1) RS-232C Serial Interface. Connector: D-Sub 9

pin (plug) x 1.

C Serial Interface (COM2) RS-422/485 Serial Interface. Connector: D-

Sub 9 pin (plug) x 1.

D Power Plug Connector -

SD Card Access LED

This lamp lights up when SD Card is inserted.

( see page 181)

NOTE: Do not remove or insert the SD Card

when the LED lamp is on. Doing so may

damage data on the SD Card.

F SD Card Interface

Cover/Replacement Battery

Insertion Cover

For information on how to open the cover, and

insert or remove the SD Card, refer to SD Card

Insertion / Removal (see page 150).

For information on how to open the cover and

replace the battery, refer to Replacing the

Primary Battery (see page 168).

G USB (mini-B) Interface Conforms to USB2.0 (mini-B) x 1.

Communication Distance: 5 m (16.4 ft) or less.

Ethernet Interface

Ethernet transmission interface (10BASE-

T/100BASE-TX)

Connector: Modular jack (RJ-45) x 1. ( see

page 181)

I Maintenance LED ( see page 181)

Part Name Description