User guide

5
 Analog RGB Interface
The number of dots (pixels) displayed are as follows:
4 Interfaces
Input signal type Analog RGB
Input signal
characteristic
Image signal : analog RGB
Synchronous signal :TTL level, negative true or positive true
Scanning type : non-interlace
Setting by OSD
(On Screen Display)
•CONTRAST
•H-POSITION
•H-size
•DIMMER(BACKLIGHT)
•ALL RESET (DEFAULT)
•BRIGHTNESS
•V-POSITION
•PHASE
•SHARPNESS
Size
H Sync.
(kHz)
V Sync.
(Hz)
Dot Clock
(MHz)
Screen Resolution
Expansion
(H: Horizontal)(V: Vertical)
Display
Resolution
640x400 24.827 56.000 21.053
x1.6 (H)
x1.92 (V)
1024x768
640x400 31.469 70.000 25.175
640x480 31.469 59.992 25.175
x1.6 1024x768640x480 37.500 75.000 31.500
640x480 35.000 66.667 30.240
720x400
*1
*1.
When you use this resolution, set “ON” for “720 × 400 Mode” in the OSD (On
Screen Display) “System Settings”.
31.469 70.000 28.320
x1.42 (H)
x1.92 (V)
1024x768
800x600 37.879 60.317 40.000
x1.28 1024x768
800x600 46.875 75.000 49.500
1024x768 48.363 60.004 65.000
x1.0 1024x7681024x768 56.476 70.069 75.000
1024x768 60.023 75.029 78.750