User guide

2
An FP-3710T series unit needs the following software for operation. As FP user manual,
provided by PDF media, describes its details, download the manual below and get the
further information. Visit our website below and get both software and reference manual.
(URL:http://www.pro-face.com/otasuke/)
• Software : Mouse Emulation Software
• Manual : FP-3710T series User Manual
The FP-3710T Series is a UL/c-UL/CSA listed product. (UL File No.E220851,CSA File
No.219866)
This unit conforms as a product to the following standards:
UL508 Industrial Control Equipment
CSA C22.2 No.
142-M1987 Process Control Equipment
<Cautions>
Be aware of the following items when building the FP into an end-use product:
• The FP must be used as a built-in component of an end-use product.
• This unit should be installed in the front face of a metal panel.
• If this unit is installed so as to cool itself naturally, be sure to install it in a vertical
panel. Also, be sure that the FP unit is mounted at least 100 mm away from any
adjacent structures or equipment. If these requirements are not met, the heat generated
by the FP unit’s internal components may cause the unit to fail to meet UL/c-UL
standard.
• For use in Pollution Degree 2 environment.
• For use on a flat surface of a Type 1 Enclosure.
The FP-3710TSeries is a CE marked product that conforms to EMC directives and Low
Voltage directives EN55011 Class A, EN61000-6-2 and EN60950-1 First Edition.
* For detailed CE marking information, please contact your local FP distributor.
Required software/Reference manual
UL/c-UL/CSA Application Notes
Model Type UL/c-UL/CSA Registration Model No.
FP3710-T41-U
3580406-01
FP3710-T41
CE Marking Notes