Manual

4
The Dip Switches and Slide Switch are located in the bottom of the FP unit. Loosen
the screws of the cover with a Phillips head screwdriver and then remove the cover.
After setting the dip switches and slide switches, reinstall the cover and screws with
the screwdriver. The tightening torque for those screws is 0.5 ~ 0.6 N•m.
Only the settings when the power supply is turned on is effective to the Dip Switches
and the Slide Switch. After changing the settings of the Dip Switches and the Slide
Switch, be sure to restart your FP unit.
• Connect the upstream port of the USB-HUB (H:USB connector)
to the Host PC for Front USB connector (J), Keypad (K) and
Mouse pointer (L) use.
2 Dimensions
3 Dip Switches and Slide Switch
K: Keypad
F/A key allows switching between function entry and character entry. An
illuminated F/A key LED indicates character entry. (US keyboard layout)
For detailed instruction of how to use the keypad, refer to “FP-3710K Series
User Manual”.
L: Mouse pointer
2-button mouse
Top View
Front View
Side View
Unit:
mm [in]
center of
display area
441[17.36]
488[19.21]
10
[0.39]
63
[2.48]
(3)
[0.12]
313[12.32]
367[14.45]
21[0.83]
center of
unit
26.5[1.04]
Dip Switches(SW1)
Slide Switch(SW2)
Bottom View
Cover