Manual

3
1 Part Names
C
D
E
F
G
H
Front View
Rear View
Bottom View
A,B
J
I
L
K
A:TFT Color LCD
Acts as a display monitor for your host.
B:Touch Panel
Allows you to switch screens or write
data to the host.
C:Power Connector (Socket)
Provides the input and ground terminals
for a power cable.
D:Setting Switch
By opening the cover, the Dip switches
and slide switch are seen. Each switch
can set a operation mode.
E:Analog RGB Connector
Connector for analog RGB interface
F:DVI-D Interface Connector
Connector for DVI-D interface
G:Serial Connector
Connector for serial (RS-232C) interface.
Used for sending touch panel data to the
host.
H:USB Connector (Type B)
Connector for USB interface. Used for
sending touch panel data to the host or
used as an upstream port for USB-HUB.
I: Front LED
Used to indicate the condition of the
power supply, a backlight burnout or
image signal input.
J:Front USB Connector (Type A)
A downstream port for embedded USB-
HUB in conformity with USB2.0/1.1
standard, which is used for connecting
USB devices.