Manual

Chapter 1 System Design
1-3
1.2 Cables for connecting with computer
This section describes cables to connect the FP with a computer.
Monitor Interface Cable Interface Computer
FP
DVI-D
FP-DV01-50
(DVI-D Cable 5m)
DVI-D
PS-2000B
FP-DV01-100
*1
(DVI-D Cable 10m)
*1 Cannot be connected to FP-3500T and 3600T series.
Analog RGB
FP-CV02-45
(Analog RGB Cable)
Analog RGB
Analog RGB
FP-CV02-45
(Analog RGB Cable)
Analog RGB PS-3000B
DVI-D
FP-DV01-50
(DVI-D Cable 5m)
DVI-I
PS4000
Series
*2*3
*2 Except for the models equipped with Atom Z510.
*3 For connection with an FP which is not marked on Rev. 2, use an analog RGB interface of the FP.
Analog RGB
CA7-CBLCVRGB-01
(DVI-A - RGB Conversion Cable)
FP-CV02-45 + CA7-CBLCDVI-D/RGB-01
(Analog RGB Cable + DVI-D/RGB Branch Cable)
DVI-D
FP-DV01-50
(DVI-D Cable 5m)
DVI-D
*4
*4 Available only when an expansion DVI-D interface is added in PS4000B series.
DVI-D
FP-DV01-50
(DVI-D Cable 5m)
DVI-I
PL3000
Series
FP-DV01-100
*1 *5
(DVI-D Cable 10m)
*5 Supported when Rev. B or later PL3000 is used.
Analog RGB
CA7-CBLCVRGB-01
(DVI-A - RGB Conversion Cable)
FP-CV02-45 + CA7-CBLCDVI-D/RGB-01
(Analog RGB Cable + DVI-D/RGB Branch Cable)
DVI-D
FP-DV01-50
(DVI-D Cable 5m)
DVI-D
Windows
®
Compatible
PC
*6
*6 For connection with the FP which is not marked on Rev. 2, connection may not be made with a DVI-
D interface of the FP. In that case, use an analog RGB interface of the FP.
Analog RGB
CA7-CBLCVRGB-01
(DVI-A - RGB Conversion Cable)
DVI-I
FP-CV02-45 + CA7-CBLCDVI-D/RGB-01
(Analog RGB Cable + DVI-D/RGB Branch Cable)
P-CV02-45
(Analog RGB Cable)
Analog RGB