Instruction Manual

6
 Analog RGB Interface
Display Area
(FP3500-T11/FP3500-T41-24V)
4 Interfaces
Input signal type Analog RGB
Input signal
characteristic
Image signal : analog RGB
Synchronous signal :TTL level, negative true or positive true
Scanning type : non-interlace
Setting by OSD
(On Screen Display)
•CONTRAST
•H-POSITION
•H-size
•DIMMER(BACKLIGHT)
•ALL RESET (DEFAULT)
•BRIGHTNESS
•V-POSITION
•PHASE
•SHARPNESS
Size
H Sync.
(kHz)
V Sync.
(Hz)
Dot Clock
(MHz)
Screen Resolution Expansion
(H: Horizontal) (V: Vertical)
Display
Resolution
640×350
*1
*1.
When the 350 pixel (vertical) signal setting is selected, 400 pixels, including
50 pixels at the top and at the bottom of the screen will be enlarged and
displayed at 480 pixels (1.2times).
31.469 70.000 25.175
×1.0 (H)
×1.2 (V)
640×420
640×400 31.469 70.000 25.175 640×480
640×400 24.827 56.420 21.053 640×480
640×480 31.469 59.992 25.175 ×1.0 640×480
720×350
*
1*2
*2.
When you use this resolution, set “ON” for “720 × 400 Mode” in the OSD (On
Screen Display) “System Settings”.
31.469 70.000 28.320
×0.89 (H)
×1.2 (V)
640×420
720×400
*
1
31.469 70.000 28.320 640×480