Instruction Manual

Pin Assignments and Signal Names for DVI-D

Connector ..................... DVI-D 24-pin male

Connector set screw ..... Inch type (#4-40UNC)

Cable DVI-D cable manufactured by Pro-face.

FP-3500T/3600T Series: FP-DV01-50 <5 m>

FP3650-T41: FP-DV01-50 <5 m>

FP-DV01-100 <10 m>

Pin Signal Name Pin Signal Name Pin Signal Name Pin Location

1 TMDS DATA2- 9 TMDS DATA1- 17 TMDS DATA0-

2 TMDS DATA2+ 10 TMDS DATA1+ 18 TMDS DATA0+

TMDS DATA2

SHIELD

TMDS DATA1

SHIELD

TMDS DATA0

SHIELD

4NC12NC20NC

5NC13NC21NC

6 DDC Clock 14 NC 22

TMDS CLOCK

SHIELD

7 DDC Data 15 GND 23 TMDS CLOCK+

8 NC 16 Hot Plug Detect 24 TMDS CLOCK-

• If a cable other than the specified DVI-D cable is used, product

performance cannot be guaranteed due to the possibility of noise

interfering with the FP unit’s operation.

• Only when the FP3650-T41 is connected with PS-2000B or PL-

3000B (Revision B or more), FP-DV01-100 can be used.

• Please turn on PS-2000B's internal dipswitch 4 when use FP-

DV01-100 with PS-2000B. (The resolution that can be

displayed is 1024 x 768 Become only (XGA). )

Please turn off dipswitch 4 when use FP-DV01-50.

• Please set PL-3000B’s internal dipswitch 5 to z sign side when

you use FP-DV01-100 with PL-3000B.

We will recommend the resolution of PL-3000B to change to

the maximum display resolution of FP additionally.

Please set it on the opposite side of z sign when use FP-

DV01-50.