Instruction Manual

5
Interfaces
 Analog RGB Interface
The number of dots (pixels) displayed are as follows:
Pin Assignments and Signal Names for Analog RGB
Input signal type Analog RGB
Input signal
characteristic
Image signal : analog RGB
Synchronous signal :TTL level, negative true or positive true
Scanning type : non-interlace
Setting by OSD
(On Screen Display)
•CONTRAST
•H-POSITION
•H-size
•DIMMER(BACKLIGHT)
•ALL RESET (DEFAULT)
•BRIGHTNESS
•V-POSITION
•PHASE
•SHARPNESS
Size
H Sync.
(kHz)
V Sync.
(Hz)
Dot Clock
(MHz)
Screen Resolution
Expansion
(H: Horizontal)(V: Vertical)
Display
Resolution
640×400 31.469 70.000 25.175
×2 (H)
×2.56 (V)
1280×1024
640×480 31.469 59.992 25.175
×2 (H)
×2.13(V)
640×480 35.000 66.670 30.240
640×480 37.861 72.810 31.500
640×480 37.500 75.000 31.500
720×400
*1
*1 When you use this resolution, set “ON” for “720 × 400 Mode” in the OSD (On Screen
Display) “System Settings”.
31.469 70.000 28.320
×1.77 (H)
×2.56(V)
800×600 35.156 56.250 36.000
×1.6 (H)
×1.7(V)
800×600 37.879 60.317 40.000
800×600 46.875 75.000 49.500
1024×768 48.363 60.004 65.000
×1.25(H)
×1.33(V)
1024×768 56.476 70.069 75.000
1024×768 60.023 75.029 78.750
1280×1024 63.981 60.000 108.000
×1.0
1280×1024 79.976 75.000 134.999
Pin
No.
Signal Name
Pin
No.
Signal Name
Pin
No.
Signal Name Pin Location
1 Analog R 6 Return R 11 Reserved
2 Analog G 7 Return G 12 DDC DATA
3 Analog B 8 Return B 13 H. SYNC
4 Reserved 9 Reserved 14 V. SYNC
5 Digital grounding 10 Digital grounding 15 DDC CLOCK
15
11
5
1