Owner manual

 Backlight Replacement

Follow the procedure given below to replace the unit’s backlight. This pro-

cedure is for the PS-3700A Series unit.

• Be sure to protect the PS-A front panel’s surface to prevent damage.

• The PS-A has an upper and a lower backlight. Be sure to replace both.

• Dispose of the old CCLF backlights according to your local, appli-

cable laws and regulations.

2) Detach the FDD unit cable and power

cable from their connectors, and re-

move the two attachment screws to

detach the FDD unit. (PS-3700A only)

1) Turn off the PS-A unit’s power sup-

ply. Remove the five (5) rear face

attachment screws, and detach the rear

cover. (PS-3701A and FP-3700T units

have eight (8) screws each.)

Do not let the attachment

screws fall inside the PS-A.

PS-3700A

PS-3701A / FP-3700T

Attachment

Screw

FDD unit Cable

Power Cable

Attachment

Screw

FDD Drive

Connector

Power Connector