User Manual

Chapter 2 Specifications
2-25
2.2.2 Performance Specifications
 Performance Specifications
CPU
PS3711-T41/
PS3711-T41-24V
ULV Intel
®
Celeron
®
M (600MHz)
PS3711-T42/
PS3711-T42-24V
ULV Intel
®
Celeron
®
M (1GMHz)
L2 Cache Memory 512KB (Built in the CPU)
Main Memory 1Slot (Max.1GB) SO-DIMM socket 256MB to 1GB (PC2700)
Chipset Intel
®
855GME GMCH and Intel
®
ICH-4
Graphic accelerator Build-in Intel
®
855GME GMCH
BIOS FirstBIOS Embedded Pro (Phoenix Technologies Co.)
Graphics XGA (1,0 24 x 768 dots)
Video Memory Max.64MB (When using Windows
®
) UMA Type
Touch Panel
Type Resistive Film (Analog)
Resolution 1,024 × 1,02 4
Service Life 1,000,000 times or more, Sweeping 100,000 times or more
Interface USB
Interface
Serial (RS-232C)
COM1 D-Sub 9 pin (plug) (RI/+5V switch possible)
COM2 D-Sub 9 pin (plug) (RS-422/RS-485 switch possible)
RAS
D-Sub 25 pin (plug)
For further details of the RAS function, refer to the “PS-3710A/PS-
3711A Series Reference Manual”.
PS/2 Keyboard PS/2 Interface (mini DIN 6 pin, socket) Side Access, 1 port
Disk IDE I/F
*1
*1 To change the Master/Slave setting of Primary IDE I/F, set Serial Mode Select switch
#5 pin on the circuit board to the desired position.  Switches (page 2-11)
Master 2.5inch HDD I/F
Slave CF Card I/F
USB
USB 2.0 compatible front 1 port
USB 2.0 compatible rear 4 ports
Connector: USB type A
Power supply voltage: 5V DC ±5%
Output current: each port: 500mA(max.), total 5 ports(front/
rear):500mA(max.)
Maximum communication distance: 5m
LAN
Rear 2 ports. This interface uses an RJ-45 type modular jack
connector (8 pins).
LAN1:auto change to 10BASE-T/100BASE-TX
LAN2:auto change to 10BASE-T/100BASE-TX/1000BASE-T
PCMCIA
Side 2 ports. PCMCIA Type II, Type III can be available.
Corresponding to CARD BUS (Excluding VIDEO ZOOM, SOUND
functions)
Sound
SPEAKER OUT
rear 1 port (mini pin audio jack conn ector)
Clock Accuracy
*2
±180 sec. /month (timing error from situation temperature an d
power-off)
SEE