User Manual

Chapter 2 Specifications
2-7
Display Functions
Expansion Slots
*1 If “Serial” is selected, COM4 cannot be used.
*2 To change the Master/Slave setting of Primary IDE I/F, set Serial Mode Select switch
#5 pin on the circuit board to the desired position.
 Switches (page 2-11)
*3 Available only for reading CD/DVD-ROM and DVD-VIDEO.
*4 The clock, RTC, built-in the PS-A has a timing error. The range of the er ror will be
between +300 and -300 sec. / month, depending on the PS-A’s conditions such as
lifetime usage or temperature difference. If you use the P S-A in a system that tak es
this error seriously, adjust the clock in regul ar intervals.
PS-3710 Series
Revision
*1
*1 The revision number of the PS-A is sho wn in the label affixed to the PS-A.
In the example shown below, an asterisk "*" is disp layed in the position where "5"
should be, meaning "Rev.5".
When PS-A Rev.5 is NOT marked When PS-A Rev.5 is marked
Display Type TFT Color LCD (15 inch)
Pixel Density 1,024 x 768 pixels
Dot Pitch 0.297 x 0.297mm
Effective Display Area 304.1 x 228.1mm (11.97 x 8.98in.)
Display Colors 260,000 Colors
Backlight's Life Span CFL (Replaceable)
LED backlight (The backlight
cannot be replaced by the user.
The unit must be sent back for
backlight replacement.)
Touch Panel Brightness
Adjustment
4 Levels (Adjus te d vi a Wi n do w s
®
Control Panel)
Contrast Control Not Possible
Display Service Life
50,000hrs.
(at 25°C and 65%RH (humidity))
Backlight Service Life
50,000hrs. or more (at ambi ent temper ature 25°C and continuous
operation - period unti l backlight brightness decreases to 50% or
backlight start s to flicker)
Slot Type PCI 2.2(5V)
Board Size 235 x 106.68mm (9.25 x 4.2in.)
Power Supply Capacity DC5V DC12V DC-12V DC3.3V
Power Consumption 1.5A 0.5A 0.1A 0.5A
SEE