User Manual

Chapter 4 Dimensions
4-15
4.3.4 Panel Cut Dimensions
Unit: mm [in.]
• Please read "5.1 Installation (page 5-2)" before designing the Panel Cut.
• When replacing the Xycom Automation 3612KPM/4612 KPM with the PL-3600K Ser ies,
it is possible to attach the PL-3600K Series without changing the panel cut dimensions by
removing the atta chments indicated in the diagram b elow. Remove the seven screws from
the top and bottom of the unit, and then remove the attachments.
• Panel cut dimensions when the attachments have been removed are as indicated below.
383.5
+1
−0
282.5
+
1
−
0
Panel thickness
area
1.6 [0.06] to
10.0 [0.39]
[11.1 2 ]
+
0.04
−
0
[15.1 ]
+0.04
−0
r ≤ 3 [0.12]
Attachment
383.54 [15.10]
257.59 [10.85]
r ≤ 3 [0.12]