User Manual

PL3000 Series Hardware Manual
4-6
4.1.3 Cable Attached Dimensions
Unit: mm [in.]
*1 The measurement in the figure above is the distance the cable connector extends from the outside of the
control box when the AC power supply connector (straight) is used. Measurements when using other
power supply connectors are shown below.
• All the above values are designed to allow for bends in the cable. The dimensions
given here are representative values depending on the type of connection cable
used. Therefore, they are all intended for reference only.
Power Connector Distance
Supplied
AC type (Straight Spring)
CA7-ACCNL-01 by Pro-face
16mm [0.63in.]
DC type (Straight Spring)
CA7-DCCNL-01 by Pro-face
28mm [1.1in.]
Optional
AC type (Right-angle Spring)
CA7-ACCNLR-01 by Pro-face
14mm [0.55in.]
DC type (Right-angle Spring)
CA5-DCCNL-01 by Pro-face
17mm [0.67in.]
Front
Side
277 [10.91]
Top
243 [9.57] 16 [0.63]
*
1
These three figures apply to the 2 slots
AC type unit.
117 [4.61] (DVI-I interface) 96 [3.78] (Serial interface) 88 [3.47] (USB interface) 63 [2.48] (Ethernet interface) 56 [2.21] (Speaker output interface)