User Manual

PL3000 Series Hardware Manual
7-6
 Dimension of the Screw Holes
When vertically mounting the PL-3000B series unit in which the DVD drive unit is built-in, drill the
attachment holes in the installation panel according to the following dimensional drawings. When mounting
the PL unit horizontally or on a wall, the positions of the holes are the s ame as in th e case that the drive unit is
NOT built-in.
Use M4 screws to install the PL unit on the installation panel.
SEE
4.1.4 Dimensions of the Screw Holes (page 4-7)
163 [6.42]
242 [9.53].
214 [8.42]
230±0.3
[9.05±0.01]
277 [10.91]
4-M4
220±0.3 [8.66±0.01]
35.5 [1.40]
191 [7.52]
179±0.3
[7.05±0.01]
4-M4
Unit: mm [in.]
2 slot type 4 slot type
220±0.3 [8.66±0.01]
35.5 [1.40]
277 [10.91]