User Manual
Chapter 6 Maintenance
6-3
(3) Clean the filter completely. If stubborn dirt or stains are present, wash the filter with a neutral deter gent.
(4) After reattaching the filter to the filter cover by hanging the filter on the fan cover’ s clips, reattach the
fan cover using the cover ’s attachment screws. The torque should be 0.2 to 0.3 N
•m.
• Do not wring the filter to dry it.
• When drying the filter, dry it without exposing it to direct sunlight.
• Allow it to air dry completely before reattaching to the PL.
• Be sure the fan cover is securely attached to the PL unit. This is to ensure the fan
cover does not fall of while the PL unit is operating.
Filter
Filter