User Manual

PL3000 Series Reference Manual
3-32
3.8.2 SMART
Item Operation
Enable
When this option is checked, monitoring of SMART
start s.
Alert Action
S pecifies the action(s) taken when the System Monitor
detects that the allowable range is exceeded. You
need to check [Enable] before you can select actions.
DOUT0 to 1 Output from the RAS port.
LED The front LED lights orange.
Buzzer Sounds a buzzer as an alarm.
Pop-up Mes sag e
When [PopupMessage] is specified as an action, the
characters entered in the field (e.g. SMART Alert) are
displayed as a popup message.
For the details about the PopupMessage feature, refer
to the following section.
Do not show alert message for
10 days.
Will not display the messege specified in
[PopupMessage] for a certain number of days only.
Sets the amount of days that the message will not be
displayed. The amount of days can be set within a
period ranging from 1 to 65,535 days.
SEE
3.3.4 When an Alert Occurs (page3-15)