User Manual

PL3000 Series Reference Manual
3-16
3.4 Checking the Status of the PL Being Monitored
3.4.1 Description
Check the status of the PL being monitored with the RAS features from the System Monitor screen.
You can also use this screen to check error/a lert details.
3.4.2 Setup Procedure
(1) When the System Monitor starts, the System Monitor icon appears on the task bar. Double-click the Sys-
tem Monitor icon to display the System Monitor scre en.
(2) Click the tab of the item you want to check.
• For details about the setup procedure, refer to the Setup Guide.
• When an error/alert occurs, the color of the corresponding tab changes.
• As for Device No. of SMART, [0] means Master or DISK0(HDD0) and [1] means Slave or
DISK1(HDD1).
System Monitor
+5.0V Pass
+12V Pass
VcoreA Pass
SEE
3.9 Setup Guide for the System Monitor Screen (page3-38)