User Manual

Chapter 2 System Setup
2-25
 DMI Event Logging
Specifies the parameters related to DMI event logging. Point the cursor to the [DMI Event Logging] on the
[Advanced] screen and press the [Enter] Key, so that the following screen will be displayed.
Event log validity
Shows the status of the event log storage area.
[Valid] The stat us is normal.
[Not valid] The status is abnormal.
Event log capacity
Shows the status of the ar ea to which event logs are written.
[Full] The area is full.
[Space Available] The area is not full.
View DMI event log
Point the cursor to [View DMI event log] and press the [Ent er] Key to vi e w the DMI event logs.
Event Logging
Specifies whether event logs need to be recorded.
[Enabled] Records event logs.
[Disabled] Does not record event logs.
ECC Event Logging
Specifies whether the event logs related to memory ECC need to be recorded.
[Enabled] Records ECC error related event logs.
[Disabled] Does not record ECC error related event logs.
Mark DMI events as read
Point the cursor to [Mark DMI even ts as read] and pre ss the [Enter] Key to mark unread event logs as read.