User Manual

Chapter 2 System Setup
2-23
 USB Controller Configuration
Specifies the USB controller options. Point the cursor to [USB Controller Configuration] on the [Integrated
Device Configuration] screen and press the [Enter] Key to display the following screen.
USB Controller #0
Displays the enabled/disabled status of the USB controller #0.
[Enabled] USB controller #0 is enabled.
[Disabled] USB controller #0 is disabled.
USB Controller #1
Specifies whether to use the USB controller 1.
When [USB Controller #0] is [Disabled], this option is fixed to [Disabled] and not displayed.
[Enabled] Uses the USB controller #1.
[Disabled] Does not use the USB controller #1.
USB Controller #2
Specifies whether to use the USB controller 2.
When [USB Controller #0] or [USB Controller #1] is [Disabled], this option is fixed to [Disabled] and no t
displayed.
[Enabled] Uses the USB controller #2.
[Disabled] Does not use the USB controller #2.