User Manual

PL3000 Series Reference Manual
2-18
 Integrated Device Configuration
Specifies the settings for the integrat ed de vices. Point the cursor to [Integrated Device Configuration] on the
[Advanced] screen and press the [Enter] Key to display the following screen.
I/O Device Configuration
Point the cursor to [I/O Device Configuration] and press the [Enter] Key to go to the set-up screen for the I/O
addresses and interrupt Nos. of the integrated devices.
PCI Configuration
Point the cursor to [PCI Configuration] and press the [Enter] Key to go to the PCI resource set-up screen.
USB Controller Configuration
Point the cursor to [USB Configuration] and press the [Enter] Key to go to the USB controller set-up screen.
SATA Operational Mode
Specifies the operation mode of the SATA controller .
[Compatible] Legacy mode is used.
[Enhanced] Native mode is used.
SEE
 I/O Device Configuration (page2-20)
SEE
 PCI Configuration (page2-21)
SEE
 USB Controller Configuration (page2-23)