User Manual

Chapter 2 System Setup
2-5
System Memory
Shows the capacity of the “System Memory”.
Extended Memory
Shows the capacity of the “Extended Mem ory”. It is the loaded memory - the size of the Video Memory.
 IDE Channel / SATA Port
Point out the cursor at the [IDE Channel 0 Master], [IDE Channel 0 Slave], [IDE Channel 1 Master], [IDE
Channel 1 Slave], [SATA Port 0], [SATA Port 1] on the “Main screen”, and then press the [Enter] key, so
that the following screen is shown.
Type
Specifies a type of drive which you use.
[Auto] Automatically specifies whether to connect to the drives and the type of drive
that you use.
[None] Specifies that all the drives are not used.
[ATAPI Removable] Connects the ATAPI removable drive.
[CD-ROM] Connects the CD-ROM drive.
[IDE Removable] Connects the IDE removable drive.
[Other ATAPI] Connects other ATAPI devices.
[User] You can directly specify the number of cylinders, heads and sectors.
•Select [Auto] to have the PL recognize the hardware properly.