User Manual

PL3000 Series Reference Manual
2-4
2.2 System Parameters Setting
Select the items to set up the system information. Here, we introduce the system parameters of each item.
2.2.1 Main
System Time
Shows the time which the PL currently recognizes. Move the cursor by the [Tab]key and set a proper time for
the PL by the [Tab], [+] and [-] keys because the factory default setting is the Japan’s Standard Time
(GMT+09:00).
System Date
Shows the date which the PL currently recognizes. Set a proper date for the PL by the [+] and [-] keys.
IDE Master Channel 0 Master /
IDE Slave Channel 0 Slave /
IDE Channel 1 Master /
IDE Channel 1 Slave /
SATA Port 0 /
SATA Port 1
Displays the name of devices connected to the PL. Pressing the [Enter] key will c all up the Para meter settings
menu.
• Normally, use only the factory (default) settings.
• An item in [ ] indica tes the factory default setting.
SEE
 IDE Channel / SATA Port (page2-5)