User Manual

PL3000 Series Reference Manual
2-2
2.1 System Setup Screen Operation
This section describe s the o pera tion of the BIOS setup screen.
(1) Connect a USB keyboard to the PL.
(2) T urn the PL’s power ON.
(3) After the boot-up screen comes up, press the [F2] key. The setup utility starts and the following screen
appears.
(4) To use the [ ← ] [ → ] arrow keys, change the menu contents. A setting scre en of each system will be
displayed.
(5) To use the [ ↑ ] [ ↓ ] arrow keys, move up and d own the cursor to select an item of the system, then con-
firm it by the [Enter] key.
(6) Change the value of the confirmed item with the [-] and [+] keys.
(7) To return from the sub layer to the main layer, press the [Esc] key.
• Normally, use only the factory (default) settings.
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the set-up.
Press the [F1] key to display the help for the system setup.
Press the [F9] key to reset all settings to the default settings.
Press the [F10] key to save the settings and exit the system setup menu.
SYSTEM SETTING SELECTION AREA
Each of the title s (areas) listed here contains system setting items.
Menu
Help area
Shows the information of
the items you selected.