User Manual

Chapter 3 PL Monitoring Features
3-45
 Messages Displayed on the Event Viewer Screen
The error types/locations shown by the Event Viewer are as follows.
Error/Alert Type Message
VcoreA VcoreA voltage Error has occurred.
VcoreB VcoreB voltage Error has occurred.
+3.3V +3.3V Error has occurred.
+5.0V +5.0V Error has occurred.
+12.0V +12V Error has occurred.
-12.0V -12V Error has occurred.
+1.8V +1.8V Error has occurred.
CPU FAN CPU Fan Error has occurred.
System FAN System Fan Error has occurred.
System
Temperature
SystemTtemperature Error has occurred.
CPU Temperature CPU Tempertature Error has occurred.
System2
Temperature
System2 Temperature Error has occurred.
DIN0 DIN0 Error has occurred.
DIN1 DIN1 Error has occurred.
Watchdo g Watchdog Timer Error has occurred.
Backlight Backlight Error has occurred.
SMART
SMART Alert has occurred. Attribute (Attribute ID) (Attribute Name) Device
(No.) (HD Model).
The descriptions in the parentheses vary depending on details of occurring
alerts and the device where alerts occur (0:Master, 1:Slave)
Soft Mirror Mirror Disk Error has occurred.
Battery Battery Error has occurred.
• The location and action of the previous error/alert can be checked on the Event Viewer Screen.
For the details of the Event Viewer, refer to the following section.
SEE
3.5.1 Description (page3-17)