User Manual

PL3000 Series Reference Manual
3-40
3.9.2 SMART
Item Operation
Device No.
Displays the number assigned to the hard disk/SSD/CF card to be
monitored.
Model
Displays the model of the hard disk/SSD/CF card.
• SMART monitoring can be executed only on drive that have been subjected to
an operational inspection by Digital Electronics Corporation. The backgroun d of
drives that have not been given an operational inspection is gray.
Status
Specifies the item to be monitored. The status of each monitoring item is
displayed.
[O.K.]: Normal
[Alert]: Alert
[Disable]: Not monitored
[Not Supported]: Not supported
• [Not Supported] is displayed when a drive that does not support SMART
monitoring is detected.