User Manual

Chapter 3 PL Monitoring Features
3-39
3.9.1 Voltage / Fan / Temperature / Backlight / Watchdog Timer / Soft Mirror
• The Temperature, FAN, and Soft Mirror tabs display the same items as the Voltage tab.
• The Backlight and Watchdog Timer tabs display [Status] only.
Item Operation
Name Displays the monitoring ite m.
Status
Specifies the item to be monitored. The status of each monitoring item is
displayed.
[Pass]: Normal
[Error]: Abnormal
[Disable]: Not monitored
• When [Soft Mirror] is selected, different items are displayed. For details, refer to
the manual of the Software Mirroring Utility.
Buzzer Off
When [Buzzer] is selected for the error notification method, you can stop the
buzzer by clicking [Buzzer Off].
Reset
When an error is detected, clicking [Reset] recovers th e System Monitor
from the “error” status.
• After an error is resolved, make sure to reset. If reset is not performed, the error
history remains, which causes th e error to be detected again even if it was
resolved.
For the procedure to recover from an error status, ref er to the following section.
Minimize Stores the System Monitor screen in the task tray.
SEE
3.3.3 When an Error Occurs (page3-14)