User Manual

Chapter 3 Installation and Wiring
3-7
3.2.1 Removal/Attachment the Rear Cover
 For PS-3710A Series
Unscrew the five ( 5) attachment screws used to hold the Rear Cover in place, and remove the Rear Cover. The
torque of the rear cover required for these screws is 0.5 to 0.6 N
•m.
3.2.2 PS-A Internal View
 PS-3710A Series
• Use a screwdriver to loosen or tighten the screws. Be sure not to tighten scre ws
too tightly, since it may damage the unit.
• Be careful when removing or inserting any screws that they do not fall inside the
PS-A.
FD Drive
DVD-ROM Drive
PCMCIA Slot
(2 ports)
HDD Unit
Main Memory Installation Area (2)