Instruction Manual

6
Wiring
1. Wiring Precautions
• To help prevent noise and interference
problems, separate all control,
communication and power lines by placing
them in a separate ducts.
If different wires must be placed in the same
duct, separate them with an earthed/grounded
divider.
• If the lines cannot be separated, use
shielded lines and create a ground from the
shield line.
• Use noise-reducing external wiring
methods to increase overall system
reliability.
• To prevent power surges or noise
interference, use ducts to separate all
DC I/O or current circuit wires from
communication cables.
• To prevent malfunctions due to noise,
communication cables must be wired
separately from high-frequency lines
and power lines such as high-voltage
lines, high-current lines, and inverters.
UL/c-UL/CSA Approval
The following units are UL/c-UL/CSA
listed products.
(UL File No.E220851, UL File No.E182139,
CSA File No.219866)
These products conform to the following
standards:
 UL508
Industrial Control Equipment
 UL1604
Electrical Equipment for Use in Class I and
II, Division 2, and Class III Hazardous
(classified) Locations
 CSA-C22.2 No.14-M95
Industrial Control Equipment
 CSA-C22.2 No.213-M1987
Non-Incendive Electrical Equipment for Use
in Class I, Division 2 Hazardous Locations
The following units are UL/c-UL listed
products. (UL File No.E171486, UL File
No.E231702)
Duct for I/O
Signal Lines
Duct for Control
Lines
Duct for Power
Lines
I/O Signal
Lines
Control
Lines
Power
Lines
Grounded
Separators
Duct (non-
conducting
resin/
plastic)
Earth/Ground
Product Model No.
UL/c-UL/CSA
Registration
Model No.
AGP3300-L1-D24-CA1M 3280007-03
AGP3300-S1-D24-CA1M
*1
*1 The sales area is limited.
3280007-02
AGP3300-T1-D24-CA1M 3280007-01
AGP3400-S1-D24-CA1M
*1
3280035-02
AGP3400-T1-D24-CA1M 3280035-01
Product Model No.
UL/c-UL
Registration
Model No.
AGP3500-S1-AF-CA1M
*1
*1 The sales area is limited.
3280024-21
AGP3500-T1-AF-CA1M 3280035-45
AGP3510-T1-AF-CA1M
*1
3581301-01
AGP3600-T1-AF-CA1M 3280024-13