Owner's manual

3
General Specifications
 Electrical Specifications
 Environmental Specifications
Power Supply
Input Voltage DC24V
Rated Voltage DC19.2 to 28.8V
Allowable
Voltage Drop
2ms (max.)
Power
Consumption
13W (max.)
In-Rush
Current
60A (max.)
*1
*1 The FWHM (Full-width, half maximum) value is approximately 40µs. (When exceeding 30A)
Voltage Endurance AC1000V 20mA for 1minute (between charging and FG terminals)
Insulation Resistance DC500V 10MΩ (min.) (between charging and FG terminals)
Physical
Surrounding Air
Temperature
0 to +50°C
*1
*1 When using in an environment where the temperature becomes or exceeds 40°C for an extended
period of time, the screen contrast level may decrease from its original level of brightness.
Storage
Temperature
-20 to +60°C
Ambient Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Storage Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Dust 0.1mg/m
3
and below (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment.