User's Manual

English
4
3.1 Wi-Fi Connection
Tap Settings – Wireless & Networks – Wi-Fi – tap to turn it to ‘ON ‘. After a moment, your Wi-Fi network nearby will be listed. If you need to rescan for available
networks, tap the menu on right top corner, and tap ‘Refresh’. Your device lists the networks it finds within range. Tap the network you have access to, enter
password, and tap ‘Connect’. When your tablet is connected to the network, the wireless indicator appears in the status bar. Waves indicate connection
strength.
Tip：
You may turn off Wi-Fi if you’re not using it to save the battery.
To turn off Wi-Fi, tap it again to ‘OFF’ .
You may also enter Wi-Fi setting by swiping down from top middle
part,and enter by taping ‘Wi-Fi’.
3.2 Bluetooth
Turn on Bluetooth
You must pair your device with another device before you can transfer
files between them. Under ‘Settings’, choose ‘Bluetooth’. Tap Bluetooth
to ‘ON’, the Bluetooth indicator then appears in the status bar. It will
start searching available devices nearby. If you need to rescan, tap the
menu on top right corner, and tap ‘Refresh’.
Scan Device
After scanning, there will be a list of all available Bluetooth devices in range. If the device you want to pair with isn’t in the list, ensure
that the other device is turned on and set to be discoverable.
Pair with Bluetooth Device
Tap the name of an available Bluetooth device you want to pair with. On the target device you will get a ‘Bluetooth pairing request’
dialog. Tap ‘Pair’, it will then show you paired devices.