User Manual

ManualsBrandsProel ManualsStage MonitorWD10A V2 Stage Monitor

WD10AV2

WD12AV2

WD15AV2

acve wedge monitors

USER MANUAL

Summary of content (16 pages)

PAGE 1
WD10AV2 WD12AV2 WD15AV2 active wedge monitors USER MANUAL
PAGE 2
FCC COMPLIANCE NOTICE This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 3
INDEX INDICE FCC COMPLIANCE NOTICE. . . . . . . . . . . . . . . . . . . . 2 DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . 4 FREQUENCY RESPONSE . . . . . . . . . . . . . . . . . . . . . . 5 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL (FIG.1). . . . . . . . . . . . . . . . . . . . . . 6 CONNECTIONS (FIG.2) . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
TECHNICAL SPECIFICATIONS SPECIFICHE TECNICHE MODEL WD10AV2 WD12AV2 WD15AV2 System type 2-way coaxial vented stage monitor 2-way coaxial vented stage monitor 2-way coaxial vented stage monitor Low Frequency Device 10” woofer with 2"VC 12” woofer with 2.5"VC 15” woofer with 3"VC High Frequency Device 1” compression driver with 1"VC 1” compression driver with 1.35"VC 1” compression driver with 1.
PAGE 5
RISPOSTA IN FREQUENZA FREQUENCY RESPONSE WD10AV2 - preset MONITOR WD10AV2 - preset FOH 20 20 dB dB 10 10 0 0 -10 -10 -20 -20 -30 40 50 100 200 500 1k 2k Hz 5k 10k 20k WD12AV2 - preset MONITOR -30 40 50 100 200 500 1k 2k Hz 5k 10k 20k 500 1k 2k Hz 5k 10k 20k 500 1k 2k Hz 5k 10k 20k WD12AV2 - preset FOH 20 20 dB dB 10 10 0 0 -10 -10 -20 -20 -30 40 50 100 200 500 1k 2k Hz 5k 10k 20k WD15AV2 - preset MONITOR -30 40 50 100 200 WD15AV
PAGE 6
PANNELLO DI CONTROLLO (FIG.1) CONTROL PANEL (FIG.1) 2 4 1 5 8 3 6 7 11 9 10 CONNESSIONI (FIG.2) CONNECTIONS (FIG.
PAGE 7
CONFIGURATION EXAMPLES (FIG.3) single monitor WD10-12-15AV2 ESEMPI CONFIGURAZIONI (FIG.
PAGE 8
SAFETY AND PRECAUTIONS • CAUTION: before using this product read carefully the following safety instructions. Take a look of this manual entirely and preserve it for future reference. When using any electric product, basic precautions should always be taken, including the following: – To reduce the risk, close supervision is necessary when the product is used near children. – Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.
PAGE 9
CE CONFORMITY • Proel products comply with directive EMC 2014/30/CE, as stated in EN 55103-1 and EN 55103-2 standards and with directive LVD 2014/35/CE, as stated in EN 60065 standard. • Under the EM disturbance, the ratio of signal-noise will be changed above 10dB. PACKAGING, SHIPPING AND COMPLAINT • This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions immediately after unpacking it. • If any damage is found, immediately advise the dealer.
PAGE 10
GENERAL INFORMATION Thank you for having chosen a PROEL product. The WEDGE Series PROEL has set a standard for affordable and road-proof stage monitors, able to offer a highly valuable monitoring solution, with perfect sound intelligibility and high SPL in low-profile and portable enclosures. The Version 2 of this very successful series represents a major step forward, with several design’s refinements and feature’s improvements.
PAGE 11
RED LED illuminates when the internal amplifier's output is limited. NOTE: When this LED flashes reduce the input signal level. 6. PRESET MONITOR/FOH selector This switch allows the selection between two equalisation settings, suited to two different uses. MONITOR Suited for stage monitoring sound reinforcement for an improved feedback rejection. FOH This preset has been designed for typical sound reinforcement applications with the speaker mounted on floor stand. 7.
PAGE 12
AVVERTENZE PER LA SICUREZZA • ATTENZIONE: Durante le fasi di uso o manutenzione, devono essere prese alcune precauzioni onde evitare danneggiamenti alle strutture meccaniche ed elettroniche del prodotto. Prima di utilizzare il prodotto, si prega di leggere attentamente le seguenti istruzioni per la sicurezza. Prendere visione del manuale d’uso e conservarlo per successive consultazioni: – In presenza di bambini, controllare che il prodotto non rappresenti un pericolo.
PAGE 13
CONFORMITÀ CE • I Prodotti Proel sono conformi alla direttiva EMC 2014/30/CE, secondo gli standard EN 55103-1 ed EN 55103-2 ed alla direttiva LVD 2014/35/CE, secondo lo standard EN 60065. • Se sottoposto a disturbi EM, il rapporto segnale-rumore può essere superiore a 10dB. IMBALLAGGIO, TRASPORTO E RECLAMI • L’imballo è stato sottoposto a test di integrità secondo la procedura ISTA 1A. Si raccomanda di controllare il prodotto subito dopo l’apertura dell’imballo.
PAGE 14
INFORMAZIONI GENERALI Grazie per aver scelto un prodotto PROEL. Con la serie WEDGE PROEL ha fissato uno standard per i monitor da palco a prezzi accessibili e con una solidità a prova di concerto, in grado di offrire una soluzione di monitoraggio di grande valore con una perfetta intelligibilità del suono ed un elevato SPL, e un cabinet a basso profilo e facilmente trasportabile.
PAGE 15
5. SIGN/LIMIT (indicatore di segnale e clip limiter) LED VERDE si accende per indicare la presenza del segnale sull'ingresso dell'amplificatore. LED ROSSO si accende quando si attiva il limiter interno o quando il convertitore AD di ingresso satura. NOTA: Se questo LED lampeggia ridurre il segnale di ingresso. 6. selettore PRESET MONITOR/FOH Permette la selezione fra due differenti impostazioni di equalizzazione, adattate a due differenti usi.
PAGE 16
PROEL S.p.A. (World Headquarter) Via alla Ruenia 37/43 64027 Sant’Omero (TE) - ITALY Tel: +39 0861 81241 Fax: +39 0861 887862 www.proel.com REV.