Specifications

31
CHANNEL 14 – FOCUS
This channel is dedicated to the motorized focus.
ADDRESSING
The Control Board on the front side of the PLML250SE allows you to assign the
DMX fixture address, which is defined as the first channel from which the
PLML250SE will respond to the controller. If you set, for example, the address to
channel 5, the PLML250SE will use the channel 5 to 20 for control.
Please, be sure that you don’t have any overlapping channels in order to control
each PLML250SE correctly and independently from any other fixture on the
DMX data link.
If two, three or more PLML250SE have the same address, they will work in similar
mode.
For address setting follow this procedure:
- Switch on the PLML250SE and wait until the fixture reset has finished.
- Press the ““UP” and “DOWN” keys until the display shows "A" + the number of
the address channel.
- Confirm by pressing “ENTER” key and the letter "A" will flash.
DISPLAY FUNCTION
COLOR SLOPE
You can enable the linear rotation of the color wheel that allows to select two
colors at same time. To enable the Color Mode, press the MODE
MODE MODE
MODE button and
select
F1 . Press the UP
UPUP
UP button and when the display shows Y press ENTER
ENTERENTER
ENTER
button. To disable this function, select
N on the display and press ENTER
ENTERENTER
ENTER to
confirm.
PAN REVERSE
Press the MODE
MODEMODE
MODE button and select
F2 to enter into the PAN Reverse mode. Press
UP
UPUP
UP button and when the display shows
Y . To disable this function, select N on
the display and press ENTER
ENTERENTER
ENTER to confirm.
TILT REVERSE
Press the MODE
MODEMODE
MODE button and select
F3 to enter into the TILT Reverse mode. Press
UP
UPUP
UP button and when the display shows
Y . To disable this function, select N on
the display and press ENTER
ENTERENTER
ENTER to confirm.