Specifications

25
During the installation do not touch the glass bulb bare-handed. Please follow
the lamp manufacturer’s notes.
Do not install lamps with a higher wattage. Lamps with a higher wattage
generate temperatures that the device was not designed for. Damages caused
by non observance are not subject to warranty.
PROCEDURE
Unscrew the fixation screws positioned on the top chassis of the head (SEE
PICTURE BELOW).
Remove the top chassis and individuate the metal lid of the lamp group.
Unscrew the two screws by hand on the top side and remove the lid.
Insert the new lamp into the lamp holder paying attention to remove to do not
touch the bulb with the fingers.
Tighten the metal lid and the top chassis of the head too pay attention to fit
together the bottom one.
Adjust the lamp as described on the next paragraph.
Do not operate this device with opened cover.
SCREWS ON THE
TOP CHASSIS
METAL LID OF THE OPTICAL
GROUP
SCREWS
A B